2013年7月29日星期一

Cisco 640-760, de formation et d'essai

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Cisco 640-760 à la première fois.


Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.


Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.


Beaucoup de gens trouvent difficile à passer le test Cisco 640-760, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Cisco 640-760 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.


Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Cisco 640-760. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Cisco 640-760. Choisir le produit de Pass4Test particulier pour le test Certification Cisco 640-760 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.


Code d'Examen: 640-760

Nom d'Examen: Cisco (Supporting Cisco Service Provider IP NGN Operations (SSPO))

Questions et réponses: 121 Q&As

640-760 Démo gratuit à télécharger: http://www.pass4test.fr/640-760.html


NO.1 According to the ITIL v3 framework, after an incident is resolved and the root cause identified, what
should be the next step?
A. Enter the problem in the problem management system and close the ticket.
B. Use functional escalation to escalate root cause analysis.
C. Update the closure categorization for the incident.
D. Record the root cause analysis in the known error database to identify and resolve potential incidents.
Answer: D

Cisco examen   640-760   640-760   640-760

NO.2 Which one of the following statements is true for syslog messages?
A. A syslog packet is limited to 1024 bytes.
B. Syslog messages use UDP port 520.
C. At the application layer, syslog sends acknowledgments.
D. Syslog is a peer-to-peer protocol.
Answer: A

Cisco   640-760 examen   640-760   certification 640-760   640-760

NO.3 While looking at a Cisco CRS syslog, you see this message:
%ROUTING-FIB-1-FIBTBLINIT
Based on the message alone, should you consider it a high-priority message?
A. Yes, because router syslog messages require immediate action.
B. Yes, because the severity of the syslog message requires immediate action.
C. No, because router syslog messages are informational only.
D. No, because the severity of the syslog message is informational only.
Answer: B

Cisco examen   640-760 examen   640-760

NO.4 According to the ITIL v3 framework, what five characteristics can you use to identify effective KPIs?
(Choose five.)
A. specific
B. agreed
C. realistic
D. budget-based
E. heuristic
F. time-based
G. measurable
H. Boolean
Answer: A,B,C,F,G

Cisco   640-760   640-760 examen   640-760

NO.5 According to the ITIL v3 framework, how does problem management contribute to network
availability?
A. by maintaining optimal levels of service quality
B. by developing and documenting workarounds to known problems
C. by providing inputs for calculating SLA penalties
D. by restoring normal service operation as quickly as possible
Answer: B

Cisco   640-760   640-760

NO.6 Which of these items enables an agent to notify the management station of significant events by
sending an unsolicited message?
A. syslog message
B. SNMP trap
C. managed object code
D. RMON notification
Answer: B

Cisco   640-760 examen   640-760   certification 640-760

NO.7 Which three of these methods can you use to back up a configuration running Cisco IOS Software
Release 12.2 Mainline? (Choose three)
A. SNMP
B. SFTP
C. TFTP
D. KRON
E. SSH
Answer: A,C,D

Cisco   640-760 examen   640-760 examen   certification 640-760

NO.8 Which three steps would you use to troubleshoot a performance-related problem in the network core?
(Choose three.)
A. define problem
B. analyze problem
C. determine affected users
D. create action plan
E. verify service-level requirements
Answer: A,B,D

Cisco   640-760   certification 640-760   640-760   certification 640-760   certification 640-760

NO.9 Which one of these items is used to define key elements for successfully building obtainable service
levels?
A. critical success factors
B. key performance indicators
C. key quality indicators
D. metrics
Answer: A

Cisco examen   640-760   640-760 examen   640-760

NO.10 According to the ITIL v3 framework, what triggers an incident?
A. whenever a severity 3 incident is closed
B. when the problem is identified as urgent
C. when a problem is discovered during a change window
D. when an outage is called into a service center
Answer: D

Cisco examen   certification 640-760   640-760   640-760   640-760

NO.11 Each syslog message has a numerical severity level assigned to generate error messages about
software or hardware malfunctions. Which of these messages has the highest numeric severity level?
A. Error
B. Emergency
C. Debug
D. Critical
E. Alert
Answer: C

Cisco   640-760   640-760   640-760 examen   640-760 examen

NO.12 What is the advantage of using a passive monitoring technique?
A. does not require continuous measurement of traffic types
B. measures application-specific parameters per traffic classes
C. identifies issues and bottlenecks before they occur
D. no interference with live traffic
Answer: D

Cisco examen   640-760   640-760 examen

NO.13 Which three steps are best practices in accurately documenting a network? (Choose three).
A. Document separate Layer 2 and Layer 3 topologies.
B. Document Layer 3 topology to include all switches and routers.
C. Clearly document the port identifiers on all of the links.
D. Clearly depict different routing domains with appropriate information such as the routing protocol and
process number.
E. Avoid defining router-id commands and loopbacks in the router label.
F. Use connectivity details of all layers of the OSI model in diagrams.
Answer: A,C,D

Cisco   640-760 examen   640-760

NO.14 According to the ITIL v3 framework, what is the primary
reason for implementing SLAs.?
A. Ensure accurate measurement of response times.
B. Establish an open line of communication between the customer and the service provider
C. Reduce network latency.
D. Provide a legal contract between the customer and the service provider.
Answer: D

Cisco   certification 640-760   640-760

NO.15 Refer to the Gigabit Ethernet link in the exhibit.
Which of the following IP address schemes would allow for IP reachability across this link?
A. Router A with IP 10.1.1.0/31 to Router B with IP 10.1.1.1/31
B. Router A with IP 10.1.1.1/31 to Router B with IP 10.1.1.2/31
C. Router A with IP 10.1.1.7/30 to Router B with IP 10.1.1.8/30
D. Router A with IP 10.1.1.255/31 to Router B with IP 10.1.1.253/31
Answer: A

Cisco examen   certification 640-760   640-760

NO.16 The command below was executed on a Cisco 12000 Series Router running Cisco IOS XR. Which
statement is true about the output of the command?
A. 71.44.1.66 is an IP address local to the router.
B. OSPF is not running on this router.
C. There are no static routes in the routing table.
D. The last route entry for Loopback causes routing loops
Answer: C

Cisco   640-760 examen   certification 640-760   certification 640-760   certification 640-760   640-760

NO.17 Which two steps are best practices to be followed while documenting a network. (Choose two.)
A. Use proper icons for different devices in the network.
B. Use different colors and widths for denoting different links of different bandwidth.
C. Use same icons for all types of routers and switches in the network.
D. Avoid defining the router-id in the router label.
E. Use connectivity details of all layers of the OSI model in diagrams.
Answer: A,B

Cisco   640-760   640-760   certification 640-760   640-760

NO.18 A router is causing problems in the network and you want to capture as much information as you can
before you manually reload or power-cycle the router. What command would you type at the CLI of the
router to capture information that would be lost when the router is rebooted?
A. show crashinfo
B. show syslog
C. show tech-support
D. show stacks
E. show memory
Answer: C

Cisco   640-760   certification 640-760

NO.19 You are responsible for monitoring the IP network. You have noticed since the beginning of your shift
that a particular interface on a network switch has been flapping, and it has finally gone down. You open
an incident ticket. According to the ITIL v3 framework, what should you do to determine if it is a recurring
issue?
A. Use Telnet to connect to the device and troubleshoot.
B. Ping the device to verify connectivity.
C. Perform a search of the known-error database.
D. Clear the alarm from the event system to see if it recurs.
E. Clear the interface counters and see if additional errors are incurred
Answer: C

Cisco examen   640-760   certification 640-760

NO.20 What action should you take if the NMS is receiving temperature alarms from a router?
A. Check the fan tray to ensure that all of the fans are functioning properly.
B. Check the line card to ensure that it is not generating excessive heat.
C. Check the interfaces to ensure that they are not generating excessive heat.
D. Check the grounding wire to ensure that it is attached properly.
Answer: A

Cisco   640-760   640-760 examen

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Cisco 640-760 comme votre guide d'étude.


没有评论:

发表评论