Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification EMC E20-326. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de E20-326, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test EMC E20-326. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
Code d'Examen: E20-326
Nom d'Examen: EMC (Symmetrix Solutions Design Exam)
Questions et réponses: 132 Q&As
Les produits de Pass4Test sont préparés pour le test Certification EMC E20-326, y compris les formations et les informations ciblées au test EMC E20-326. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification EMC E20-326. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test EMC E20-326. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
Le Certificat EMC E20-326 est un passport rêvé par beaucoup de professionnels IT. Le test EMC E20-326 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test EMC E20-326. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test EMC E20-326 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A EMC E20-326 pour prendre un essai.
Le programme de formation EMC E20-326 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
E20-326 Démo gratuit à télécharger: http://www.pass4test.fr/E20-326.html
NO.1 A customer is interested in utilizing TimeFinder/Snap to generate a backup copy of an application
every six hours. In order for you to calculate the SAVE Pool requirements you will need to run Change
Tracker. To which value should you set the reset interval length for DeltaMark?
A. 21600
B. 10800
C. 86400
D. 32400
Answer: A
EMC E20-326 E20-326 examen E20-326
NO.2 A TimeFinder/Snap of production data must be recreated in a four hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every four hours
B. SUM report over four hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A
certification EMC E20-326 examen certification E20-326
NO.3 A TimeFinder/Snap of production data must be recreated in a two hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every two hours
B. SUM report over two hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A
EMC E20-326 E20-326 examen
NO.4 You are proposing a new VMAX array with FAST VP. The customer reports their application needs a
small amount of EFD capacity and asks whether 200 GB EFDs or 400 GB EFDs would provide better
overall performance. Which drive size do you recommend and why?
A. 400 GB EFDs. They support higher IOPS than 200 GB EFDs.
B. 200 GB EFDs. They support higher I/O density than 400 GB EFDs.
C. 400 GB EFDs. They support higher I/O density than 200 GB EFDs.
D. 200 GB EFDs. They support higher IOPS than 400 GB EFDs.
Answer: B
EMC E20-326 examen E20-326 examen E20-326 examen
NO.5 Prior to starting an implementation, which tool should be used to automate the data collection on a UNIX
host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: A
EMC E20-326 E20-326 certification E20-326 E20-326 examen
NO.6 A customer is interested in utilizing SRDF/AR to generate a remote copy of an application with an RPO
of six hours. In order for you to calculate the bandwidth requirements you will need to run Change Tracker.
To which should you set the reset interval length for DeltaMark?
A. 21600
B. 86400
C. 32400
D. 10800
Answer: D
EMC E20-326 examen certification E20-326 E20-326
NO.7 A customer plans to migrate existing AIX, HP-UX and IBM iSeries hosts to a new VMAX array.
Performance data is needed to design the VMAX volumes configuration layout.
What host performance data do you request from the customer?
A. IOSTAT, SAR, WRKDSKSTS
B. STP, Perfmon, SMF/CMF
C. IOSTAT, STP, WRKDSKSTS
D. Perfmon, SAR, SMF/CMF
Answer: A
EMC E20-326 examen E20-326 E20-326 examen
NO.8 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the AIX Servers, to
list the software modules installed?
A. pkginfo
B. lslpp
C. swlist
D. cfgmgr
Answer: B
EMC E20-326 examen E20-326 E20-326 examen E20-326
NO.9 You are designing a new VMAX array. The customer's primary concern is maximizing capacity
available to the host. What RAID protection should you recommend?
A. RAID-5 (7+1)
B. RAID-6 (6+2)
C. RAID-1/0
D. RAID-5 (3+1)
Answer: A
EMC certification E20-326 E20-326
NO.10 A Symmetrix VMAX has been configured with Dynamic Cache Partitions.
What is a criterion that must be met for a cache slot to be eligible for donation?
A. The fall through time must be greater than the donation age
B. The fall through time must be less than the donation age
C. The cache slot must belong to a static partition
D. There must be available cache slots in the default partition
Answer: A
EMC examen E20-326 examen certification E20-326 certification E20-326
NO.11 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a flexible partition reaches the write pending limit set for that
partition?
A. Host write activity to that partition will be throttled
B. Cache will be borrowed from the other flexible partition
C. Cache will be borrowed from the default partition
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: A
certification EMC certification E20-326 E20-326 examen
NO.12 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the HP-UX Servers,
to list the software modules installed?
A. swlist
B. lslpp
C. pkginfo
D. pkgchk
Answer: A
EMC certification E20-326 E20-326 E20-326 examen
NO.13 You are designing a new VMAX array. The customer requires high performance for their random
write-intensive application. Which RAID protection should you recommend?
A. RAID-5
B. RAID-6
C. RAID-1
D. RAID-S
Answer: C
EMC E20-326 E20-326 E20-326 examen
NO.14 A customer plans to migrate existing AIX and Windows hosts as well as Mainframe z/OS LPARs to a
new VMAX array. Performance data is needed to design the VMAX volumes configuration layout. Which
host performance data do you request from the customer?
A. STP, SAR, WRKDSKSTS
B. SAR, Perfmon, WRKDSKSTS
C. IOSTAT, Perfmon, SMF/CMF
D. IOSTAT, SAR, SMF/CMF
Answer: C
EMC certification E20-326 E20-326 E20-326
NO.15 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports their environment can tolerate five minutes or less of data recovery
following a disaster but have not yet determined the maximum allowable downtime for their applications.
The customer asks which remote replication methods you recommend for their environment.
What do you recommend?
A. Defer making a recommendation until the application RTO is known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RPO in known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A
EMC E20-326 examen E20-326 examen certification E20-326 E20-326
NO.16 A customer will migrate existing AIX, HP-UX and Windows hosts from a DMX-3 to a new VMAX array.
You need performance data from the existing array to design to the new VMAX volumes configuration
layout. Which tools can be used to collect Symmetrix array performance data?
A. ControlCenter Performance Manager and STP Collector
B. EMC Workload Generator and STP Navigator
C. Storage Configuration Advisor and STP Collector
D. ControlCenter Performance Manager and SymmMerge
Answer: A
certification EMC E20-326 examen E20-326
NO.17 What is a best practice when configuring a Symmetrix VMAX for optimal performance and cost?
A. Different drive types are mixed and spread throughout the array.
B. Dedicated engines have appropriate drive types to meet application needs.
C. A dedicated array with Enterprise Flash Drives (EFD).
D. A dedicated array based upon application requirement.
Answer: A
certification EMC E20-326 certification E20-326 E20-326 E20-326 certification E20-326
NO.18 Prior to starting an implementation, which tool should be used to automate the data collection on a
Windows host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: B
EMC examen E20-326 certification E20-326 E20-326 examen
NO.19 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a static partition reaches the write pending limit set for that
partition?
A. Cache will be borrowed from a flexible partition
B. Cache will be borrowed from the default partition
C. Host write activity to that partition will be throttled
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: C
certification EMC E20-326 E20-326 examen E20-326 E20-326 examen
NO.20 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports the maximum allowable downtime for their applications is ninety minutes,
but they have not yet determined how much data recovery following a disaster their environment can
tolerate.
The customer asks which remote replication method you recommend for their environment.
What do you recommend.?
A. Defer making a recommendation until the application RPO in known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RTO is known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A
EMC E20-326 E20-326 E20-326
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test EMC E20-326.
没有评论:
发表评论