Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification EMC E20-326, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test EMC E20-326.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification EMC E20-326. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Code d'Examen: E20-326
Nom d'Examen: EMC (Symmetrix Solutions Design Exam)
Questions et réponses: 132 Q&As
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel EMC E20-326 peut vous assurer à réussir 100% le test EMC E20-326. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
L'équipe de Pass4Test rehcerche la Q&A de test certification EMC E20-326 en visant le test EMC E20-326. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test EMC E20-326 sans aucune doute.
La Q&A EMC E20-326 de Pass4Test est liée bien avec le test réel de EMC E20-326. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test EMC E20-326 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test EMC E20-326, la voie à la réussite de votre professionnel sera ouverte pour vous.
E20-326 Démo gratuit à télécharger: http://www.pass4test.fr/E20-326.html
NO.1 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a static partition reaches the write pending limit set for that
partition?
A. Cache will be borrowed from a flexible partition
B. Cache will be borrowed from the default partition
C. Host write activity to that partition will be throttled
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: C
EMC examen E20-326 E20-326 examen
NO.2 A customer is interested in utilizing TimeFinder/Snap to generate a backup copy of an application
every six hours. In order for you to calculate the SAVE Pool requirements you will need to run Change
Tracker. To which value should you set the reset interval length for DeltaMark?
A. 21600
B. 10800
C. 86400
D. 32400
Answer: A
EMC E20-326 certification E20-326
NO.3 Prior to starting an implementation, which tool should be used to automate the data collection on a
Windows host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: B
EMC E20-326 examen E20-326 examen
NO.4 You are designing a new VMAX array. The customer's primary concern is maximizing capacity
available to the host. What RAID protection should you recommend?
A. RAID-5 (7+1)
B. RAID-6 (6+2)
C. RAID-1/0
D. RAID-5 (3+1)
Answer: A
EMC E20-326 E20-326 examen
NO.5 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports the maximum allowable downtime for their applications is ninety minutes,
but they have not yet determined how much data recovery following a disaster their environment can
tolerate.
The customer asks which remote replication method you recommend for their environment.
What do you recommend.?
A. Defer making a recommendation until the application RPO in known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RTO is known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A
certification EMC certification E20-326 certification E20-326
NO.6 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports their environment can tolerate five minutes or less of data recovery
following a disaster but have not yet determined the maximum allowable downtime for their applications.
The customer asks which remote replication methods you recommend for their environment.
What do you recommend?
A. Defer making a recommendation until the application RTO is known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RPO in known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A
certification EMC E20-326 E20-326 E20-326
NO.7 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a flexible partition reaches the write pending limit set for that
partition?
A. Host write activity to that partition will be throttled
B. Cache will be borrowed from the other flexible partition
C. Cache will be borrowed from the default partition
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: A
certification EMC certification E20-326 E20-326 examen certification E20-326 E20-326
NO.8 A Symmetrix VMAX has been configured with Dynamic Cache Partitions.
What is a criterion that must be met for a cache slot to be eligible for donation?
A. The fall through time must be greater than the donation age
B. The fall through time must be less than the donation age
C. The cache slot must belong to a static partition
D. There must be available cache slots in the default partition
Answer: A
certification EMC E20-326 E20-326 E20-326
NO.9 A TimeFinder/Snap of production data must be recreated in a four hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every four hours
B. SUM report over four hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A
certification EMC E20-326 examen E20-326 E20-326 E20-326
NO.10 A TimeFinder/Snap of production data must be recreated in a two hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every two hours
B. SUM report over two hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A
EMC examen E20-326 E20-326 examen E20-326 examen
NO.11 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the AIX Servers, to
list the software modules installed?
A. pkginfo
B. lslpp
C. swlist
D. cfgmgr
Answer: B
EMC E20-326 E20-326
NO.12 A customer plans to migrate existing AIX, HP-UX and IBM iSeries hosts to a new VMAX array.
Performance data is needed to design the VMAX volumes configuration layout.
What host performance data do you request from the customer?
A. IOSTAT, SAR, WRKDSKSTS
B. STP, Perfmon, SMF/CMF
C. IOSTAT, STP, WRKDSKSTS
D. Perfmon, SAR, SMF/CMF
Answer: A
EMC E20-326 E20-326 examen E20-326 examen
NO.13 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the HP-UX Servers,
to list the software modules installed?
A. swlist
B. lslpp
C. pkginfo
D. pkgchk
Answer: A
EMC E20-326 E20-326 E20-326 E20-326 E20-326
NO.14 A customer plans to migrate existing AIX and Windows hosts as well as Mainframe z/OS LPARs to a
new VMAX array. Performance data is needed to design the VMAX volumes configuration layout. Which
host performance data do you request from the customer?
A. STP, SAR, WRKDSKSTS
B. SAR, Perfmon, WRKDSKSTS
C. IOSTAT, Perfmon, SMF/CMF
D. IOSTAT, SAR, SMF/CMF
Answer: C
EMC examen E20-326 certification E20-326 E20-326
NO.15 A customer is interested in utilizing SRDF/AR to generate a remote copy of an application with an RPO
of six hours. In order for you to calculate the bandwidth requirements you will need to run Change Tracker.
To which should you set the reset interval length for DeltaMark?
A. 21600
B. 86400
C. 32400
D. 10800
Answer: D
EMC E20-326 examen E20-326 examen E20-326 examen
NO.16 Prior to starting an implementation, which tool should be used to automate the data collection on a UNIX
host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: A
EMC examen certification E20-326 E20-326 E20-326 examen E20-326 examen
NO.17 A customer will migrate existing AIX, HP-UX and Windows hosts from a DMX-3 to a new VMAX array.
You need performance data from the existing array to design to the new VMAX volumes configuration
layout. Which tools can be used to collect Symmetrix array performance data?
A. ControlCenter Performance Manager and STP Collector
B. EMC Workload Generator and STP Navigator
C. Storage Configuration Advisor and STP Collector
D. ControlCenter Performance Manager and SymmMerge
Answer: A
EMC examen E20-326 E20-326 examen
NO.18 You are designing a new VMAX array. The customer requires high performance for their random
write-intensive application. Which RAID protection should you recommend?
A. RAID-5
B. RAID-6
C. RAID-1
D. RAID-S
Answer: C
EMC examen E20-326 E20-326 examen
NO.19 What is a best practice when configuring a Symmetrix VMAX for optimal performance and cost?
A. Different drive types are mixed and spread throughout the array.
B. Dedicated engines have appropriate drive types to meet application needs.
C. A dedicated array with Enterprise Flash Drives (EFD).
D. A dedicated array based upon application requirement.
Answer: A
EMC E20-326 examen E20-326 examen certification E20-326
NO.20 You are proposing a new VMAX array with FAST VP. The customer reports their application needs a
small amount of EFD capacity and asks whether 200 GB EFDs or 400 GB EFDs would provide better
overall performance. Which drive size do you recommend and why?
A. 400 GB EFDs. They support higher IOPS than 200 GB EFDs.
B. 200 GB EFDs. They support higher I/O density than 400 GB EFDs.
C. 400 GB EFDs. They support higher I/O density than 200 GB EFDs.
D. 200 GB EFDs. They support higher IOPS than 400 GB EFDs.
Answer: B
certification EMC E20-326 examen E20-326 E20-326 examen
Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test EMC E20-326. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test EMC E20-326.
没有评论:
发表评论